The following additional standards apply specifically to hot water systems:
- If the system is installed externally and on or in a heritage item, draft heritage item, heritage conservation area or draft heritage conservation area, it must not be located on a roof and must be located in the rear yard.
Please refer to these provisions in the State Policy in the State Policy for development standards relating to hot water, systems, including noise level requirements under exempt development.
Solar energy systems
Solar energy systems may be installed as exempt or complying development under the State Environmental Planning Policy (Transport and Infrastructure) 2021 (the ISEPP).
A solar energy system means any of the following systems:
- photovoltaic electricity generating system,
- solar hot water system,
- solar air heating system.
If you propose to remove or prune any existing trees or vegetation, you should contact your council first to make sure you don’t need approval for this.
Works must be structurally adequate, installed in accordance with manufacturer’s specifications and comply with the Building Code of Australia (BCA).
- Any structures that would be located on public land, or on or over a public road (including temporary structures), must have separate approval from the relevant council, or Roads and Maritime Services under the Roads Act 1993 and the Local Government Act 1993.
- Generally, exempt development cannot be carried out on: